FR100L&FR200L For Wire drawing machine
- 19 -
machine
wire drawing machine
1
：
Winding drive in water
tank wire drawing machine
2
：
Unwinding drive
3:Straight line wire drawing
machine
0
：
0
：
host drive in water tank wire drawing machine
Used in water tank type wire drawing machine host or straight line wire drawing machine host
1
：
Winding drive in water tank wire drawing machine
Used in winding of water tank wire drawing machine or winding of straight line wire drawing
machine
2
：
Unwinding drive
Used for unwinding
3
：
Straight line wire drawing machine
Used in straight line wire drawing machine
H00.01
Balance bar centre point
setting
0.0%
～
100.0%
50.00%
△
To set the position of balance bar center point with the feedback value
H00.02
Balance bar feedback
source
0: AI1
1: AI2
2: Communication given
3: HI pulse input
0
×
0
：
AI1
Feedback signal of balance bar set by AI1
1
：
AI2
Feedback signal of balance bar set by AI2
2
：
Communication given
Feedback signal of balance bar set by communication source
3
：
HI pulse input
Feedback signal of balance bar set by HI pulse input
H00.03
Proportional gain P
0.0
～
100.0%
40.0%
△
H00.04
Integral time Ti
0.00
～
300.00s
0.00
△
Proportional gain P
It decides the regulating intensity of the PID regulator. The higher the P is, the larger the
regulating intensity is. The value 100.0 indicates when the deviation between PID feedback and PID
setting is 100.0%; the adjustment amplitude of the PID regulator on the output frequency reference is
the maximum frequency.
Integral time Ti:
It decides the integral regulating intensity. The shorter the integral time is, the larger the regulating
intensity is. When the deviation between PID feedback and PID setting is 100.0%, the integral
regulator performs continuous adjustment for the time set in FA-06. Then the adjustment amplitude
reaches the maximum frequency.
H00.05
PID effect upper limit
PID effect lower limit
～
100.0%
100.0%
×
H00.06
PID effect lower limit
-100.0%
～
PID effect upper limit
-100.0%
×
PID output frequency is limited H00.05 & H00.06
100.0% corresponding to maximum frequency
H00.07
Feedforward frequency
given source
0: Digital given (Setting H00.08)
1: AI1
2: AI2
3: Communication given
4: HI pulse input
Winding:2
Unwinding:
0
Straight
line:2
×
To select feedforward frequency given source
0
：
Digital given
Setting by H00.08
1
：
AI1
