FOTEK GD20-004G-2, Operation Manual

Page: 42 / 171

Goodrive20 Series VFD Function parameter list
-37-
Function
code
Name Description Default Modify
P00.16
AVR
function
selection
0: Invalid
1: Valid during the whole procedure
The auto-adjusting function of the VFD can
cancel the impact on the output voltage of
the VFD because of the bus voltage
fluctuation.
1
○
P00.18
Function
parameter
restore
0
–6
0: No operation
1: Restore the default value (excluding the
motor parameters)
2: Clear fault records
3: Function code locking (lock all function
codes)
4: Reserved
5: Restore the default value (factory test
mode)
6: Restore the default value (including the
motor parameters)
Note:

After the selected operation is performed,
the function code is automatically
restored to 0. Restoring default values
may delete the user password. Exercise
caution when using this function.

Restoring default values (factory test
mode) will restore the parameters to the
corresponding standard version.
Non-professionals shall exercise caution
when using this function.
0
◎
P01 group Start and stop control
Function
code
Name Description Default Modify
P01.00 Start mode
0: Direct start: start from the starting
frequency P01.01
1: Start after DC braking: start the motor from
the starting frequency after DC braking (set
the parameter P01.03 and P01.04 ). It is
suitable in the cases where reverse rotation
0
◎