manualshive.com logo in svg

Fostex PD606, Owner'S Manual

The Fostex PD606 is a high-quality professional digital multitrack recorder. For a comprehensive guide on how to operate and fully utilize its features, make sure to download the Owner's Manual for free from manualshive.com. Don't miss out on maximizing the potential of your PD606 with this essential manual.

Share
Download
background image

Declaration of EC Directive

This equipment is compatible with the EMC Directive (2004/108/EC) - Directive on approximation of member
nation's ordinance concerning the electromagnetic compatibility and with the Low Voltage Directive (2006/95/
EC) - Directive on approximation of member nation's ordinance concerning electric equipment designed to be
used within the specified voltage range.

The Affect of Immunity on This Equipment

The affect of the European Specification EN61000-6-1 (coexistence of electromagnetic waves - common
immunity specification) on this equipment are as shown below.

In the electrical fast transient/burst requirements, surge, conducted disturbances by radio-frequency fields, power
frequency magnetic field, radiate electromagnetic field requirements and static electricity discharging environment,
this could be affected by generation of noise in some cases.

FOSTEX DISTRIBUTORS LIST IN EUROPE

* Including non-EU countries (as of March, 2007)

<ITALY>

NAME: Proel  S. p. A.
ADD: Zona Via Alla Ruenia, 37/43 64027 -
Sant’Omero (Teramo), Italy
TEL: (+39) 0861-81241, FAX: (+39) 0861-887862

<THE NETHERLANDS>

NAME: IEMKE ROOS AUDIO B. V.
ADD: Kuiperbergweg 20, 1101 AG Amsterdam, The
Netherlands
TEL: (+31) 20-697-2121, FAX: (+31) 20-697-4201

<NORWAY>

NAME: Siv. Ing. Benum AS
ADD: P.O. Box 145, Vinderen, 0319 Oslo, Norway
TEL: (+47) 2213 9900, FAX: (+47) 2214 8259

<SPAIN>

NAME: Letusa S. A.
ADD: C/Laguna 10, 28923 Alcorcon, Madrid, Spain
TEL: (+34) 91-4862800, 91-4470898
FAX: (+34) 91-6414597

<SWEDEN>

NAME: Kinovox-Benum A/B
ADD: Solna Strandvag 78 171 54 Solna, Sweden
TEL: (+46) 8 5052 1176, FAX: (+46) 8 5052 1010

<SWITZERLAND>

NAME: Audio Bauer Pro AG
ADD: Bernerstrasse-Nord 182, CH-8064 Zurich,
Switzerland
TEL: (+41) 1-4323230, FAX: (+41) 1-4326558

<UK>

NAME: SCV London
ADD: 40 Chigwell Lane, Oakwood Hill Industrial
Estate, Loughton, Essex IG10 3NY  U. K.
TEL: (+44) 20-8418-0778
FAX: (+44) 20-8418-0624

<AUSTRIA>

NAME: ATEC Audio-u. Videogeraete
VertriebsgesmbH.
ADD: Im Winkel 5, A-2325 Velm, Austria
TEL: (+43) 2234-74004, FAX: (+43) 2234-74074

<BELGIUM>

NAME: General Audio
ADD: Raymond Pelgrimslaan 101, B-1702 Groot-
Bijgaarden, Belgium
TEL: (+32) 2-4630650, FAX: (+32) 2-4661500

<DENMARK>

NAME: SC Sound ApS
ADD: Malervej 2, DK-2630 Taastrup, Denmark
TEL: (+45) 4399-8877, FAX: (+45) 4399-8077

<FINLAND>

NAME: Noretron Oy Audio
ADD: P. O. Box 22, FIN-02631 Espoo, Finland
TEL: (+358) 9-5259330, FAX: (+358) 9-52593352

<FRANCE>

NAME: Sennheiser France
ADD: 128 bis, avenue Jean-Jaures, 94851 Ivry-sur-
Seine Cedex, France
TEL: (+33) 1 4987 0300, FAX: (+33) 1 4987 0324

<GERMANY>

NAME: Mega Audio GmbH
ADD: Stromberger Str. 32, D-55411 Bingen,
Germany
TEL: (+49) 6721-94330, FAX: (+49) 6721-32046

<GREECE>

NAME: Bon Studio S. A.
ADD: 6 Zaimi Street, Exarchia, 106.83 Athens,
Greece
TEL: (+30) 210-3809-605, 606, 607, 608
FAX: (+30) 210-3845-755, 210-3827-868

<ICELAND>

NAME: I. D. elrf. electronic Ltd.
ADD: ARMULA 38 108 REYKJAVIK, ICELAND
TEL: (+354) 588 5010, FAX: (+354) 588 5011

Summary of Contents for PD606



































































































































































































































Reviews:

No comments

Related manuals for PD606

Yamaha Tenor Owner'S Manual preview
Tenor
Brand: Yamaha Pages: 12
Sound Devices CL-8 User Manual preview
CL-8
Brand: Sound Devices Pages: 8
Nagra II Specifications preview
II
Brand: Nagra Pages: 3
Sony RDR-GXD500 Service Manual preview
RDR-GXD500
Brand: Sony Pages: 82
Sony RDR-HX520 Service Manual preview
RDR-HX520
Brand: Sony Pages: 105
Sony RDR-HX710 Operating Instructions Manual preview
RDR-HX710
Brand: Sony Pages: 112
Sony RDR-HX720 Operating Instructions Manual preview
RDR-HX720
Brand: Sony Pages: 112
Sony RDR-HX900 Operating Instructions Manual preview
RDR-HX900
Brand: Sony Pages: 120
Sony RDR-HX510 Service Manual preview
RDR-HX510
Brand: Sony Pages: 111
Sony RDR-HX820 Operating Instructions Manual preview
RDR-HX820
Brand: Sony Pages: 120
Sony RDR-HX525 Operating Instructions Manual preview
RDR-HX525
Brand: Sony Pages: 124
Sony RDR-HX1010 Operating Instructions Manual preview
RDR-HX1010
Brand: Sony Pages: 116
Sony RDR-HX1080 Service Manual preview
RDR-HX1080
Brand: Sony Pages: 123
Sony RDR-HX510 (French) Manuel Du Propriétaire preview
RDR-HX510
Brand: Sony Pages: 128
Sony RDR-HX780 Operating Instructions Manual preview
RDR-HX780
Brand: Sony Pages: 136
Sony RDR-GXD500 Operating Instructions Manual preview
RDR-GXD500
Brand: Sony Pages: 110
Sony RDR-GX380 Operating Instructions Manual preview
RDR-GX380
Brand: Sony Pages: 92
Sony RDR-HX900 Service Manual preview
RDR-HX900
Brand: Sony Pages: 142

Brands by name

Popular brands

Load more brands