Fostex PD606, Owner'S Manual

Page: 33 / 226

33
Location Recorder Model PD606
Chapter 2: Preparation before using the PD606
The following procedure assumes that partition 1 (PT01) which has no recorded file is
currently selected.
Inserting a disk
LOCK
PANEL LOCK
OFF
REW F FWD
DISC IN
OPEN
OPEN
1) Slide the [OPEN] lever to the right.
The cover of the disk tray opens a little, so you can open the cover by hand.
2) Insert a disk to the drive slot.
The unit loads the disk and reads the disk information.
When the unit is shipped from the factory, the current drive is set to the internal hard
disk drive, so the display shows the Home screen for partition 1. Therefore, the screen
does not change when loading a DVD-RAM disk.
To eject the disk, press the eject button located at the left of the slot.
3) Close the tray cover until locked by hand.
Now you can format the DVD-RAM disk by following the procedure described on the next
page.
LOCATE CUE
SLATE JAM PRE REC
OFF
ON
symbol
0 9
WXYZ
8
TUV
7
PQRS
GHI
4
JKL
5
MNO
6
space
1
ABC
2
DEF
3
CLEAR
LIGHT EXIT
C3
C4
MS
FILE SEL TIME QUICK SET
3
2
1
6
L
R
ON
OFF
POWER
DVD HDD
ACCESS
FILE
SHIFT CONTRAST MENU DRV,PAT. TC SET
CUE NEXT PREV
BATT
1 / 3 / 5 + 2 / 4 / 6
ST BUS
READY TRK
ENTER / YES
LINK MASTER
LOCATE CU
SLA JAM PRE REC
OFF
ON
symbol
0 9
WXYZ
8
TUV
7
PQRS
GHI
4
JKL
5
MNO
6
space
1
ABC
2
DEF
3
CLEAR
LIGHT EXIT
C2
C3
C4
MS
FILE SEL TIME QUICK SET
4
3
2
1
5
6
L
R
ON
OFF
POWER
DVD HDD
ACCESS
FILE
SHIFT CONTRAST MENU DRV/PAT. TC SET
CUE NEXT PREV
ENTER
YES
BATT/
1 / 3 / 5 + 2 / 4 / 6
ST BUS
READY TRK
C1
Eject button
The internal DVD multi drive of the PD606 features a slim drive and accepts a non-cartridge DVD-
RAM disk (4.7GB, 2-3 x or more than 3x). An unused DVD-RAM disk must be formatted in UDF 1.5.
Preparation of a DVD-RAM disk
<Note>: Do not eject a DVD disk from the disk tray while the current drive is set
to the DVD drive and the disk is running. Before you eject the disk, make sure
that the disk stopped (the [PAUSE] indicator is unlit). Also note that it takes some
time to eject the disk. Do not press the [PLAY], [F FWD] or [REW] key.