Fostex PD606, Owner'S Manual

Page: 41 / 226

41
Location Recorder Model PD606
Chapter 3: Names and Functions
6. [USB HOST] connector (Series A Receptacle/USB 2.0 High speed)
Not currently supported. Prepared for the future expansion.
7. [USB KYBD] connector (Series A Receptacle/USB 1.1)
Used to connect to a USB keyboard. You can control the PD606 from the keyboard
(see “Connection examples of a keyboard” on page 66).
8. [USB PC] connector (Series B Receptacle)
Used to connect to a personal computer. You can transfer audio files between the
PD606 and your personal computer (see pages 68 and 118).
1 2 3 4
1
2
3
VBUS
D -
D +
4
GND
5. [ST BUS OUT] connector (XLR-5-32 type/balanced)
Outputs the stereo bus L/R signals. It is used to connect to an external audio
device. The reference level is set to +4dBu by default but you can change it to
-10dBu or -60dBu using the "Stereo out level" menu item in the "SYS SETUP" menu
of the MENU mode (see page 161).
9. [DC IN 12-24V] connector (XLR-4-32 type/male)
Connects the optional AC adaptor or an external battery.
10. [DC OUT] connectors (Hirose 4-pin, HR10A-7R-4S type/female)
Outputs DC 12 V/0.5 A power. You can supply power to an external device.
11. [ADJUST] lever
Used to adjust the protector on the left of the rear panel (see page 25).
1
2
3 GND
L COLD
L HOT
4
R HOT
5 R COLD
1
2
3
GND
NC
NC
4 12-24V
1
2
4
3
1
2
3
GND
NC
NC
4 12-24V
5
4
1
2
3
1
2
4
3
1 2 3 4
1
2
3
VBUS
D -
D +
4
GND
<Note>: When you connect the PD606 to a personal computer using the
[USB PC] connector, do not connect any device to the [USB HOST] connec-
tor.
<Note>: When you connect the PD606 to a personal computer using the
[USB PC] connector, do not connect any device to the [USB HOST] connec-
tor.