Fostex PD606, Owner'S Manual

Page: 168 / 226

168
Location Recorder Model PD606
Chapter 8: MENU mode/SYS SETUP menu
Chain play mode setting [Chain play]
4) Use the [MENU] dial to select the desired option and press the [ENTER/YES] key to confirm
your setting.
The “Chain play” menu item selects how the recorder behaves after playback of an audio file
finishes.
By default, the recorder stops at the playback end point. However, you can make the recorder
pause at the beginning of the next audio file or play the next audio file until all audio files on a
disk (or a partition) are played back.
Flashing
3) Use the [MENU] dial to select the “Chain play” menu item and press the [ENTER/YES] key.
The current setting starts flashing and you can now select the desired option.
1) While the unit is stopped, press the [SHIFT] key to light the SHIFT indicator, followed by the
[ENTER/YES] key.
2) While “SYS SETUP” is highlighted, press the [ENTER/YES] key.
The display now shows the SYS SETUP menu screen.
5) Press the [EXIT] key repeatedly until you exit the MENU mode.
The unit stops when an audio file is played back to the end.
Off
Pause
The unit pauses at the beginning of the next audio file when an audio file is played
back to the end.
You can select from among “Off”, “Pause” and “AutoPly (the default is “Off”).
Options
AutoPly
The unit continuously plays back all audio files following the current file on the cur-
rent disk (or partition) in the numerical order. When the unit plays back the last file to
the end, it stops.