Fostex PD606, Owner'S Manual

Page: 79 / 226

79
Location Recorder Model PD606
Chapter 5: Recording/Playback
Mixer settings
The mixer section provides the function for mixing and sending six input sources (analog or
digital) to the stereo bus. You can record the stereo bus signals to stereo L/R tracks.
The six input channels of the mixer section provide controls for the analog input signal, includ-
ing the gain, limiter, HPF, phase, etc. The mixer section also features track arming function
(ready/safe selection) for tracks 1 through 6 and the stereo L/R tracks.
The following diagram shows the signal flow of the mixer section of the PD606.
P48V
T12V LINE/MIC
AMP
GAIN
LIMITER
HPF
PHASE
ST BUS
SEND
PAN
ST BUS
MASTER
LIMITER
SAFE/
READY
REPRO/
INPUT
SEL
MONITOR
SEL/PFL
DA
DA
TO RECORDER
(1 - 8TRK FILE)
TO STEREO BUS OUT
TO HP/MON SP
TO ANALOG OUT 1-6 DA
FROM RECORDER
(REPRO DATA 1-8)
ANALOG IN 1-6
DIGITAL IN
AD
According to the analog audio signal fed to the [ANALOG IN] connector, set the LINE-MIC
switch to "LINE" or "MIC". When you select "MIC", set the phantom power switch to "48V",
"DM" or "T12" appropriately according to the microphone connected.
Input signal selection
LINE-MIC switches and
phantom power switches
HPF
(Hz)
300 50
-12 -6 OFF
(dB/oct)
200 130
INPUT
SEL
300 50
-12 -6 OFF
200 130
300 50
-12 -6 OFF
200 130
300 50
-12 -6 OFF
200 130
300 50
-12 -6 OFF
200 130
300 50
-12 -6 OFF
200 130
48V T12
MIC
DM 48V T12 DM 48V T12 DM 48V T12 DM 48V T12 DM 48V T12 DM
LINE MIC LINE MIC LINE MIC LINE MIC LINE MIC LINE