manualshive.com logo in svg

Forum SSW 40, Operating Instructions Manual, Page: 77 / 88

Share
Download
Forum SSW 40 Operating Instructions Manual Download Page 77

Operation Maintenance Manual 

2018-05 

PN 9GV73109-D - Revision: 02 

Safety Spinning Wrench 

77

IN

SP

EC

TI

O

N / 

M

AI

N

TE

NAN

C

E

6.5 

Cleaning

 WARNING

Health hazards from service 
products!

Splashes of diluted drilling mud and 
small parts.
ALWAYS wear your personal protective 
equipment.

WEAR EYE PROTECTION!

WEAR PROTECTIVE GLOVES!

The operating conditions and operating environment 
result in contamination on the SSW-40. Remove this 
contamination regularly to prevent incrustation and ensure 
safe operation of the machine. To clean shut off the 
SSW-40, disconnect from pneumatic system and release 
attachments. 

Time of Cleaning

Clean contamination from the SSW-40 regularly. The 
machine should be cleaned thoroughly at the end of each 
shift at the latest. 

Procedure and Cleaning Agents 

FORUM Handling Tools

 

recommends cleaning the SSW-40 

with a high-pressure steam cleaner. Use it to clean the 
body, the adjustment screw and roller assembly thoroughly 
from inside and outside. 

Summary of Contents for SSW 40

























































































Reviews:

No comments