Operation Maintenance Manual
2018-05
PN 9GV73109 - Revision: 02
Safety Spinning Wrench
45
C
O
M
M
IS
SION
IN
G
/
O
PE
R
A
TION
4.2
Operation
WARNING
Danger of pinching/crushing feet!
Transporting and setting down heavy
components.
» NEVER step below moving
Equipment parts.
WARNING
Separated pneumatic lines pose an
injury hazard!
» Do not fix any disconnected
pneumatic lines without
depressurizing the complete
pneumatic system.
» Protect yourself from leaks.
WARNING
Health hazards from service
products!
This symbol warns of health hazards
resulting from contact of service
products (e.g. lubricants, fluids) with
the skin, mucous membranes, eyes and
respiratory paths.
DANGER
Suspended load!
The falling load can cause severe, even
lethal injuries.
» NEVER stand under suspended
loads and in the swing area of
suspended loads.
WARNING
Danger of pinching/crushing body!
» DO NOT step between the
unsecured frames of the
unclamped device.
» NEVER reach in the SSW-40.
WEAR EYE PROTECTION!
WEAR PROTECTIVE HELMET!
WEAR PROTECTIVE GLOVES!
WEAR SAFETY SHOES!
WEAR EAR PROTECTION!
Operational Safety
1. Do not touch the SSW-40 while in operation.
2. All screw are tightened.
3. Make sure that ALL pneumatic lines are isolated
before any work is carried out in the SSW-40.
4. It is recommended to have the SSW-40 operated by
the driller.
5. Ensure that visual contact is always present between
the deck personnel, and the operator in the
doghouse.
6. Never open the elevator when SSW-40 operation is
not finished.
7. The driller and floor man must coordinate operation
of the elevator, slips/spider and SSW-40 so one tool
is engaged around the drill pipe before the other is
disengaged. Thus, one or both tools continuously
suspend the drill pipe during all stages of drill pipe
handling operations.