Operation Maintenance Manual
Safety Spinning Wrench
PN 9GV73109 - Revision: 02 2018-05
6
G
EN
ER
A
L
VII
Requirements for Operator
Basic knowledge of safe handling and use of the SSW-40
includes knowledge of the general safety precautions.
Ensure that the SSW-40 is operated only in compliance
with the general safety precautions and other instructions
in this OMM.
Training
The operating company is obligated to organize and hold
regular training to ensure that all personnel involved with
transporting, installing, operating and/or servicing the
SSW-40 is familiar with the required procedures and safety
precautions.
Minimum Qualifications
All work on the SSW-40 requires special knowledge and
qualifications on the part of the operating personnel. All
personnel working on SSW-40 must have the following
qualifications:
- Personal suitability for the work performed.
- Suitable qualifications for the work performed.
- Familiarity with the safety equipment and its function.
- Familiarity with this operating manual – particularly the
safety precautions – and all sections relevant for the
work to be performed.
- Familiarity with the elementary instructions on
operating safety and accident prevention.
In general, all employees must have one of the following
minimum qualifications:
- Technical training for independent work on the
SSW-40.
- Sufficient qualifications for working on the SSW-40
under supervision and at the instructions of a trained
specialist.
VI
Obligations of the Operating Company
Planning and Checking Safety Measures
The obligation of the operating company to due diligence
includes planning safety measures and supervising their
observance. All personnel performing work on and with
the SSW-40 must be trained by the operating company
for the work performed on and with the SSW-40. All
personnel must have read and understood the OMM.
Minimizing Risk of Injury
The following principles apply to minimize the risk of
injury:
• Ensure that work on the SSW-40 is performed only by
qualified personnel.
• The personnel must be authorized for such work by the
operating company.
• The personnel must wear the prescribed protective
equipment.
• Procedures, competencies and responsibilities must
be clearly defined and established in the area of the
SSW-40. Proper behavior in the event of a malfunction
must be clear for everyone. The personnel must be
given regular training.
• All WARNING signs and information on the SSW-40
must be complete and easily legible. For this purpose
clean WARNING signs and information regularly and
replace them if necessary.
Trouble-free Operation
The following principles apply for trouble-free operation:
• Keep the complete OMM at the location where the
SSW-40 is in operation, where it is easily accessible for
everyone and in an easily legible condition.
• Use the SSW-40 exclusively for its intended purpose.
• Use the SSW-40 only when it is in a perfect operating
state.
• Before starting work, check to ensure that it is in a safe
operating state and functioning properly.