Forum SSW 40 Operating Instructions Manual Download Page 76

Page: 76 / 88

Operation Maintenance Manual

Safety Spinning Wrench

PN 9GV73109-D - Revision: 02 2018-05

TIO

N /

NAN

6.4.6

Check List for Inspections

INFO

Ensure that only sufficiently qualified
and trained personnel accomplish
maintenance work.

The following checklist serves as a copy
template for inspections to be performed in
compliance with API 8B. Always document all
performed inspections and store them safely.

Machine model

SSW- 40

Serial number

Inspection Category I

Date / Place of Inspection:

Result

Name of Inspection Operator /
Supervisor:

Sign:

NOK

Remarks:

Inspection Category II

Date / Place of Inspection:

Result

Name of Inspection Operator /
Supervisor:

Sign:

NOK

Remarks:

Inspection Category III

Date / Place of Inspection:

Result

Name of Inspection Operator /
Supervisor:

Sign:

NOK

Remarks:

Inspection Category IV

Date / Place of Inspection:

Result

Name of Inspection Operator /
Supervisor:

Sign:

NOK

Remarks:

Summary of Contents for SSW 40

























































































Search results

Summary of Contents for SSW 40

Reviews:

Forum SSW 40, Operating Instructions Manual, Page: 76 / 88

Search results

Summary of Contents for SSW 40

Reviews: