Forum 755000 Operating Instructions Manual Download Page 59

Page: 59 / 154

Operation Maintenance Manual

06-2018

PN 757000-D - Revision: 17 (up to SN 138212) Power Slip PS-500

RT/

STA

3.4.2.2

Installation of the Pipe Wiper

Preparations/Requirements

•  The Pipe Wiper is lying on plane surface.
•  The correct size Wiper has been chosen.
•  PS-500 is not mounted to the Rotary Table.
•  All hydraulic connections of the PS-500 are

disconnected.

•  Lift Beam Assembly (Hook Up Kit P/N 775002-2).
•  The Pipe Wiper is open.
•  The Wiper fixation is retracted.

Installation Procedure

1. Place the Pipe Wiper on a plane surface.

2. Open the Pipe Wiper by loosening the securing bolt.

3. Attach Lift Beam Assembly to the PS-500

. Follow

instructions in chapter 3.3.4.

4. Lift the PS-500 slightly to tension the lifting ropes.

5. Lift the PS-500 and position the PS-500 coaxial to the

Pipe Wiper

6. Slowly lower the PS-500

on top of the Pipe Wiper.

7. Close and secure the Pipe Wiper.

8. Bolt the Piper Wiper together with the PS-500

Removal Procedure

1. Perform installation procedure in reverse order.

Fig. 77: Installation Step I

Fig. 78: Installation Step II

Summary of Contents for 755000



























































































































































Search results

Summary of Contents for 755000

Reviews:

Related manuals for 755000

Brands by name

Popular brands

Forum 755000, Operating Instructions Manual

Search results

Summary of Contents for 755000

Reviews:

Related manuals for 755000

Brands by name

Popular brands