manualshive.com logo in svg

Forum 755000, Operating Instructions Manual

Share
Download
Forum 755000 Operating Instructions Manual Download Page 58

Operation Maintenance Manual

 

Power Slip PS-500  

 PN 757000-D - Revision: 17 (up to SN 138212) 06-2018

58

TR

A

N

SP

O

RT/

 

IN

STA

LL

AT

IO

N

3.4.2 

Installation and Arrangement 
of additional Equipment

3.4.2.1 

Installation of the Top Wear Guide

Preparations/Requirements

•  The correct size Top Bowl has been chosen.
•  Guide Plates are retracted.
•  Insert Carriers have been removed.
•  The PS-500 is mounted to the Rotary Table or standing 

on a plane supporting surface.

•  PS-500 is equipped with a HCGS.
•  HCGS has been switched off.
•  Lifting Sling (Hook Up Kit - P/N 755661).

Installation Procedure

1.  Attach the Top Wear Guide to the Lifting Slings 

q

. 

Only use the attachment points shown in 3.3.6.

2.  Lift and position the Top Wear Guide coaxial to the 

PS-500 

w

.

3.  Slowly lower the Top Wear Guide.

4.  Guide the Top Wear Guide brackets into the HCGS 

holes 

e

.

5.  Secure the Top Wear Guide by turning the bracket 

handles 

r

.

6.  Remove the lifting eyes and the Lifting Slings.

Removal Procedure

1.  Perform removal procedure in reverse order.

 

CAUTION

 Always make sure all handles of the Top 

Wear Guide brackets point towards the center of the 
PS-500 to lock the Top Wear Guide to the HCGS.

Fig. 75:  Installation Step I

Fig. 76:  Installation Step II

q

e

r

r

w

Summary of Contents for 755000



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands