Forum 755000 Operating Instructions Manual Download Page 12

Page: 12 / 154

Operation Maintenance Manual

Power Slip PS-500

PN 757000-D - Revision: 17 (up to SN 138212) 06-2018

VIII

Conformity

The PS-500 satisfies all requirements in applicable
directives and standards. A sample of the EC Declaration
of Conformity is given in the appendix.

INFO

This OMM is a part of the technical
documentation for the Power Slip PS-500.
The EC Declaration of Conformity is delivered
together with the PS-500. Keep these
instructions and the associated documents for
later use.

Contact FORUM Handling Tools Worldwide

In the event of problems that cannot be solved with the
aid of this OMM, please contact one of the following
addresses.

FORUM B + V Oil Tools GmbH

FORUM Handling Tools

Hermann-Blohm-Straße 2
20457 Hamburg
Germany
Tel: + 49.40.37022.6855
Fax: + 49.40.37022.6899

1023 FORUM Drive
Broussard, LA 70518 USA
Tel: +1.337.373.1800
Fax: +1.337.369.6893

E-Mail:

[email protected]

web:

www.f-e-t.com

www.blohmvoss-oiltools.com

FORUM

ENERGY TECHNOLOGIES Drilling-Service-Locations

Email:

[email protected]

Canada

Mexico

Scotland

Nr. 106, 3903 - 75 Ave
Leduc, Alberta T9E 0K3
Tel: + 1 780.980.0345
Fax: + 1 780.986.3278

Avenida Avante Monterrey N 300
Parque Industrialxico
Tel: + 52.81.8245.6800

Peregrine Road, Westhill
Aberdeenshire, AB32 6JL
Tel: + 44.1224.744000

United Arabic Emirates

Singapore

Oilfields Supply Center
Building B-45
Jebel Ali Free Zone Dubai UAE
Tel: + 971.4.883.5266

No 51 Benoi Road #06-00
Liang Huat Industrial Complex
629908
Tel: + 65.6465.4850
Fax: + 65.6465.4851
Out of hours
+ 65.913.898.12

Summary of Contents for 755000



























































































































































Search results

Summary of Contents for 755000

Reviews:

Brands by name

Popular brands

Forum 755000, Operating Instructions Manual

Search results

Summary of Contents for 755000

Reviews:

Brands by name

Popular brands