Fortinet 548B, Administration Manual

Page: 956 / 976

- 956 -
Net Mask - The network mask for the IP address of the selected PIM interface.
Hello Interval (secs) - The frequency at which PIM Hello messages are transmitted on the selected
interface.
Join/Prune Interval - The frequency at which PIM Join/Prune messages are transmitted on this PIM
interface.
DR Priority - Indicates the DR priority on the PIM interface.
BSR Border - Specifies the BSR border mode on the PIM interface.
Designated Router - The Designated Router on the selected PIM interface
Neighbor Count - The number of PIM neighbors on the selected interface.
IP Address - The IP address of the PIM neighbor for this entry.
Up Time - The time since this PIM neighbor (last) became a neighbor of the local router.
Expiry Time - The minimum time remaining before this PIM neighbor will be aged out.
Command Buttons
Refresh - Refresh the data on the screen with the present state of the data in the router.
11.8.5.6 Configuring PIM-SM Candidate RP Configuration Page
Selection Criteria
Slot/Port - Select the slot and port for which data is to be displayed. Slot 0 is the base unit.
Configurable Data
Group Address - The group address transmitted in Candidate-RP-Advertisements.
Group Mask - The group address mask transmitted in Candidate-RP-Advertisements.
Delete - Attempts to remove the specified Candidate RP Address for the PIM-SM router.
Configuration changes take effect immediately. These changes will not be retained across a power
cycle unless a save is performed.
Command Buttons
Submit - Attempts to create the specified static RP IP Address for the PIM-SM router. Configuration
changes take effect immediately. These changes will not be retained across a power cycle unless a
save is performed.
11.8.5.7 Configuring PIM-SM BSR Candidate Configuration Page