Fortinet 548B, Administration Manual

Page: 405 / 976

- 405 -
<bw-0> <bw-1>
…
<bw-6>- Each Valid range is (0 to 100) in increments of 5 and the total sum is
less than or equal to 100.
no - This command restores the default for each queue's minimum bandwidth value in the device.
Default Setting
None
Command Mode
Global Config.
7.24.2.4 queue cos-queue strict
This command activates the strict priority scheduler mode for each specified queue on a "per-port" basis.
Syntax
queue cos-queue strict <queue-id-0> [<queue-id-1>
…
<queue-id-6>]
no queue cos-queue strict <queue-id-0> [<queue-id-1>
…
<queue-id-6>]
no - This command restores the default weighted scheduler mode for each specified queue on a
"per-port" basis.
Default Setting
None
Command Mode
Interface Config.
This command activates the strict priority scheduler mode for each specified queue on a device.
Syntax
queue cos-queue strict all <queue-id-0> [<queue-id-1>
…
<queue-id-6>]
no queue cos-queue strict all <queue-id-0> [<queue-id-1>
…
<queue-id-6>]
no - This command restores the default weighted scheduler mode for each specified queue on a
device.
Default Setting
None
Command Mode
Global Config.