Fortinet 548B, Administration Manual

Page: 451 / 976

- 451 -
translator-stab-intv command disables the nssa translator’s <stabilityinterval> from the specified area
id.
Syntax
area <areaid> nssa translator-stab-intv <stabilityinterval>
no area <areaid> nssa translator-stab-intv <stabilityinterval>
Default Setting
None
Command Mode
Router OSPF Config Mode
8.3.2.13 area range
area range command creates a specified area range for a specified NSSA. The <ipaddr> is a valid IP
address. The <subnetmask> is a valid subnet mask. The LSDB type must be specified by either
summarylink or nssaexternallink , and the advertising of the area range can be allowed or suppressed.
no area range command deletes a specified area range. The <ipaddr> is a valid IP address. The
<subnetmask> is a valid subnet mask.
Syntax
area <areaid> range <ipaddr> <subnetmask> {summarylink | nssaexternallink} [advertise |
not-advertise]
no area <areaid> range <ipaddr> <subnetmask>
Default Setting
None
Command Mode
Router OSPF Config Mode
8.3.2.14 area stub
area stub command creates a stub area for the specified area ID. A stub area is characterized by the
fact that AS External LSAs are not propagated into the area. Removing AS External LSAs and Summary
LSAs can significantly reduce the link state database of routers within the stub area.
no area stub
command deletes a stub area for the specified area ID.
Syntax
area <areaid> stub
no area <areaid> stub