
- 545 -
10.2.1
Show Commands
10.2.1.1 show interface loopback
This command displays information about configured loopback interfaces.
Syntax
show interface loopback [<0-7>]
Default Setting
None
Command Mode
Privileged Exec
Display Message
If you do not specify a loopback ID, the following information appears for each loopback
interface on the system:
Loopback ID:
Shows the loopback ID associated with the rest of the information in the row.
Interface:
Shows the interface name.
IP Address:
Shows the IPv4 address of the interface
Received Packets:
Shows the number of packets received on this interface.
Sent Packets:
Shows the number of packets transmitted from this interface.
IPv6 Address:
Shows the IPv6 address of this interface
If you specify a loopback ID, the following information appears:
Interface Link Status:
Shows whether the link is up or down.
IP Address:
Shows the IPv4 address of the interface.
IPv6 is enabled (disabled):
Show whether IPv6 is enabled on the interface
IPv6 Address/Length
:
Shows the IPv6 address of the interface.
MTU size:
Shows the maximum transmission size for packets on this interface, in bytes.
10.2.2
Configuration Commands
10.2.2.1 interface loopback
This command uses to enter the Interface Config mode for a loopback interface. The range of
the loopback ID is 0 to 7.
Syntax
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...