Fortinet 548B, Administration Manual

Page: 798 / 976

- 798 -
AS_OPAQUE LSA Checksum - The sum of the LS checksums of the opaque LSAs with domain
wide flooding scope. This sum can be used to determine if there has been a change in a router's link
state database, and to compare the link-state databases of two routers. This value is in hexadecimal.
New LSAs Originated - The number of LSAs originated by this router.
LSAs Received - The number of LSAs received.
LSA Count - The total number of link state advertisements currently in the link state database.
Maximum Number of LSAs - The maximum number of LSAs that OSPF can store.
LSA High Water Mark - The maximum size of the link state database since the system started.
Retransmit List Entries - The total number of LSAs waiting to be acknowledged by all neighbors.
An LSA may be pending acknowledgment from more than one neighbor.
Maximum Number of Retransmit Entries - The maximum number of LSAs that can be waiting for
acknowledgment at any given time.
Retransmit Entries High Water Mark - The highest number of LSAs that have been waiting for
acknowledgment.
Command Buttons
Submit - Send the updated configuration to the switch. Configuration changes take effect
immediately. These changes will not be retained across a power cycle unless a save is performed.
11.4.3.3 Viewing Stub Area Summary Information
Non-Configurable Data
Area ID - The Area ID of the Stub area
Type of Service - The type of service associated with the stub metric. The switch supports Normal
only.
Metric Value - Set the metric value you want applied for the default route advertised into the area.
Valid values range from 1 to 16,777,215.
Import Summary LSAs - Whether the import of Summary LSAs is enabled or disabled.
Command Buttons
Refresh - Refresh the data on the screen to the current values from the switch.