- 765 -
Hold Multiplier
- Specifies the multiplier on Transmit Interval to assign TTL. The range is from (2 to
10). Default value is 4.
Re-Initialization Delay
- Specifies the delay before re-initialization. The range is from (1 to 10) .
Default value is 2 seconds.
Notification Interval
- Specifies the interval in seconds for transmission of notifications. The range
is from (5 to 3600) . Default value is 5 seconds.
Command Buttons
Submit
- Send the updated screen to the switch and cause the changes to take effect on the switch
but these changes will not be retained across a power cycle unless a save is performed.
11.3.22.2 Configuring LLDP Interface Configuration Page
Selection Criteria
Interface
- Specifies the list of ports on which LLDP - 802.1AB can be configured.
Transmit
- Specifies the LLDP - 802.1AB transmit mode for the selected interface.
Receive
- Specifies the LLDP - 802.1AB receive mode for the selected interface.
Notify
- Specifies the LLDP - 802.1AB notification mode for the selected interface.
Configurable Data
Transmit Management Information
- Specifies whether management address is transmitted in
LLDP frames for the selected interface.
Optional TLV(s)
•
System Name
- To include system name TLV in LLDP frames.
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...
