- 397 -
Command Mode
Privileged EXEC
User EXEC
Display Message
Rule Number:
The ordered rule number identifier defined within the IPv6 ACL.
Action:
The action associated with each rule. The possible values are Permit or Deny.
Match All:
Indicates whether this access list applies to every packet. Possible values are True or
False.
Protocol:
The protocol to filter for this rule.
Source IP Address:
The source IP address for this rule.
Source L4 Port Keyword:
The source port for this rule.
Destination IP Address:
The destination IP address for this rule.
Destination L4 Port Keyword:
The destination port for this rule.
IP DSCP:
The value specified for IP DSCP.
Flow Label:
The value specified for IPv6 Flow Label.
Log:
Displays when you enable logging for the rule.
Assign Queue:
The queue identifier to which packets matching this rule are assigned.
Mirror Interface:
The slot/port to which packets matching this rule are copied.
Redirect Interface:
The slot/port to which packets matching this rule are forwarded.
7.23.2
Configuration Commands
7.23.2.1 ipv6 access-list
This command creates an IPv6 Access Control List (ACL) identified by <name>, consisting of
classification fields defined for the IP header of an IPv6 frame. The <name> parameter is a
case-sensitive alphanumeric string from 1 to 31 characters
uniquely identifying the IPv6 access list.
If an IPv6 ACL by this name already exists, this command enters IPv6-Access-List config mode to allow
updating the existing IPv6 ACL.
Syntax
ipv6 access-list <name>
no ipv6 access-list <name>
<name>
- access-list name up to 31 characters in length.
no -
This command deletes the IPv6 ACL identified by <name> from the system.
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...
