- 434 -
Syntax
show ip ospf abr
Default Setting
None
Command Mode
Privileged Eexc
User Exec
Display Messages
Type:
The type of the route to the destination. It can be either:
•
intra — Intra-area route
•
inter — Inter-area route
Router ID:
Router ID of the destination.
Cost:
Cost of using this route.
Area ID:
The area ID of the area from which this route is learned.
Next Hop:
Next hop toward the destination.
Next Hop Intf:
The outgoing router interface to use when forwarding traffic to the next hop.
8.3.1.3 show ip ospf area
This command displays information about the area. The <areaid> identifies the OSPF area that is being
displayed.
Syntax
show ip ospf area <areaid>
Default Setting
None
Command Mode
Privileged Exec
User Exec
Display Messages
AreaID:
The area id of the requested OSPF area.
External Routing:
A number representing the external routing capabilities for this area.
Spf Runs:
The number of times that the intra-area route table has been calculated using this area's
link-state database.
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...