
- 724 -
Enter a number between 20 and 600 (0.2 to 6.0 seconds). The factory default is 60 centiseconds
(0.6 seconds). An instance of this timer exists for each GARP participant for each port.
Leave All Time (centiseconds)
- The Leave All Time controls how frequently LeaveAll PDUs are
generated. A LeaveAll PDU indicates that all registrations will shortly be deregistered. Participants
will need to rejoin in order to maintain registration. The Leave All Period Timer is set to a random
value in the range of LeaveAllTime to 1.5*LeaveAllTime. The timer is specified in centiseconds.
Enter a number between 200 and 6000 (2 to 60 seconds). The factory default is 1000 centiseconds
(10 seconds). An instance of this timer exists for each GARP participant for each port.
Command Buttons
Submit
- Update the switch with the values you entered. If you want the switch to retain the new
values across a power cycle you must perform a save.
11.3.13 Managing IGMP Snooping
11.3.13.1 Configuring IGMP Snooping Global Configuration Page
Use this menu to configure the parameters for IGMP Snooping, which is used to build forwarding lists for
multicast traffic. Note that only a user with Read/Write access privileges may change the data on this
screen.
Selection Criteria
Admin Mode
- Select the administrative mode for IGMP Snooping for the switch from the pulldown
menu. The default is disable.
Non-Configurable Data
Summary of Contents for 548B
Page 1: ...FortiSwitch 548B Version 5 2 0 2 Administration Guide...
Page 492: ...492 Default Setting Decrement 10 Command Mode Interface Config...
Page 869: ...869...
Page 976: ...www fortinet com...