Fortinet 548B, Administration Manual

Page: 477 / 976

- 477 -
<matchtype> the match-type or types specified are added to any match types presently being
redistributed. Internal routes are redistributed by default. Source protocols have OSPF, Static, and
Connetced. Match types will have internal, external 1, external 2, nssa-external 1, and nssa-external 2.
Syntax
Format for OSPF as source protocol:
redistribute ospf [metric <1-15>] [match [internal] [external 1] [external 2] [nssa-external 1]
[nssa-external 2]]
Format for other source protocols:
redistribute {static | connected} [metric <1-15>]
no redistribute {ospf | static | connected} [metric] [match [internal] [external 1] [external 2]
[nssa-external 1] [nssa-external 2]]
<1 - 15> - a value for metric.
no - This command de-configures RIP protocol to redistribute routes from the specified source
protocol/routers.
Default Setting
Metric - not-configured
Match - internal
Command Mode
Router RIP Config
8.5.2.11 ip rip authentication
This command sets the RIP Version 2 Authentication Type and Key for the specified interface. The value
of <type> is either
none , simple , or encrypt .
The value for authentication key [key] must be 16 bytes or less. The [key] is composed of standard
displayable, non-control keystrokes from a Standard 101/102-key keyboard. If the value of <type> is
encrypt, a keyid in the range of 0 and 255 must be specified.
Syntax
ip rip authentication {none | {simple <key>} | {encrypt <key> <keyid>}}
no ip rip authentication
none - This command uses no authentication.
simple - This command uses simple authentication for RIP authentication .
encrypt - This command uses MD5 encryption for RIP authentication.
<key> - 16 alpha-numeric characters to be used for authentication key.
<keyid> - a value in the range of 0 – 255 to be used for MD5 encryption.
no - This command sets the default RIP Version 2 Authentication Type.