Setup
63
Note:
When connecting more than one automatic feeder, be sure that each number is only as-
signed once.
You select the feeder number as follows:
1. In the setup menu, choose the
Machine
option.
2. In
Number
, you select a number.
3. Confirm your entry with
.
5.4.3
Automatic feeder address
For unique identification, every participant of the CAN bus system needs an address.
You select the feeder address as follows:
1. In the setup menu, choose the
Machine
option.
2. In
Address
, you select an address.
3. Confirm your entry with
.
Note:
If you select an address that has already been assigned, the message
Address already
assigned!
will appear in the display.
5.4.4
Feeder operating modes
Please leave the factory set value
SA
(= StandAlone) unchanged.
5.4.5
Base size
The set value determines:
•
The set quantity for calibrating the
Water Boiler
.
•
The standard portion size.
You define the size as follows:
1. In the setup menu, choose the
Machine
option.
2. In
Base size
, enter 500.
3. Confirm your entry with
.
Address ranges for CAN participants
1-10
=> hand terminal
11-20
=> automatic feeder
21-30
=> Forefoot weighing machine
41-50
=> IFS feed single
51-60
=> IFS-C
61-70
=> IFS feed 4-fold
71-79
=> CalfRail
