86
Shutdown and recommissioning
NOTICE!
Pressure washers can damage the automatic feeder.
►
Only clean the automatic feeder by hand using a damp cloth.
17. Empty the powder container.
18. Remove the screws holding the safety grid on the powder container. Remove the safety grid.
19. Clean the powder container and dosing unit (see
Cleaning
chapter in the operating manual
for the automatic feeder). To do this, use the scraper supplied.
20. Seal the cleaning agent storage container.
WARNING!
Beware of chemical burns from the cleaning agents used.
The cleaning agent can cause chemical burns to your eyes or hands.
►
Always wear safety glasses and chemical-proof protective gloves when disposing of clean-
ing agents. Follow all the safety instructions listed in the safety data sheet for the cleaning
agent and wear the specified safety equipment.
21. Cover the automatic feeder with a tarpaulin. This will protect it from dirt.
8.1.2
Permanent shutdown
If you are going to permanently shut down the automatic feeder, you must dispose of it in ac-
cordance with the law. To find out which regulations apply to you, contact your waste disposal
company or a waste disposal center listed in the yellow pages.
In the appendix of this manual, you will find a list of the materials used in the construction of the
automatic feeder (see 10.2 "Materials list" - 119).
1. To shut down the feeder, perform the steps for a temporarily shut down (see 8.1.1 "Tempo-
rary shutdown" - 83). You do not have to perform step 1, cleaning.
2. Dispose of any residual cleaning agent. See the data sheet of the cleaning agent for infor-
mation on the disposal of the cleaning agent.
WARNING!
Beware of chemical burns from the cleaning agents used.
The cleaning agent can cause chemical burns to your eyes or hands.
►
Always wear safety glasses and chemical-proof protective gloves when disposing of clean-
ing agents. Follow all the safety instructions listed in the safety data sheet for the cleaning
agent and wear the specified safety equipment.
3. Dispose of the automatic feeder as described in the
Disposal
chapter in the operator’s man-
ual for the automatic feeder.
