WALL PLATES & FIRRINGS
Insert the front wall plate (AP), knocking into place.
Expect this to be tight fitting. Ensure it is flush to
the top and ends.
59
59
Further secure each all of the wall plates with 3 x
35mm screws externally and internally, through the
OSB into the plate, in between the 125mm screws.
63
63
Use 2 x 125mm screws to secure the component
within the thicker section.
65
65
Insert the side wall plate (AN). Pre-drill and secure
with 4 x 125mm screws. Repeat the process for
the other side wall plate and back wall plate with
expanding foam and 125mm screws.
62
62
Pre-drill and secure with 4 x 125mm screws.
Repeat the same process for the back wall plate
(AP).
60
60
Apply expanding foam to the side panels groove.
61
61
Use 2 x 35mm screws to secure the component
within the thinner section. Repeat this process on
the opposite side.
66
66
Position the firring (AC) and butt up against the
front wall panel.
64
64
14
