WALL PANELS
Apply the side wall panel (N1) as shown above,
leaving the provided space for the window insert.
This is labelled on the layout.
45
45
Position the screw roughly 45mm from the outer
edge. Pre-drill and screw through the front into
the side wall panel using 3 x 150mm screws (top,
middle and bottom).
47
47
Slide and knock into place.
51
51
Position the screws on the wall panels OSB and
screw into the window insert batten behind.
Secure into place using 4 x 35mm screws internally
and externally, 2 x 35mm screws each side of the
window insert.
49
49
Apply the front wall panel (P) and butt up against
the front side wall panel just secured. Ensure all
edges are flush.
46
46
Knock the window insert (AA) into the section
provided. Ensure the top is flush.
48
48
Apply the other front wall panel (P). Pre-drill and
screw through the front into the side wall panel
using 3 x 150mm screws (top, middle and bottom).
52
52
Apply the last left hand side panel (J). Apply
expanding foam into the bottom groove.
50
50
12
