WALL PANELS
Insert the lintel piece (T) and knock into place.
Ensure it is flush on the top.
Once all of the wall panels are up, begin to secure
each wall panel to the floor plate underneath. Use
3 x 35mm per panel externally.
55
55
57
57
53
53
54
54
Repeat the process, using 3 x 35mm per panel
internally.
Internally position the screws each side of the
adjoining split line. Use 5 x 35mm screws for each
side of adjoining panels with the spline panel
inside from top to bottom. Repeat this process for
every adjoining panel.
Use the expanding foam into the top groove,
ready for the wall plates. Start at the front.
Position the screws on the Lintels OSB and screw
into the wall batten behind. Secure into place
using 4 x 35mm screws internally and externally, 2
x 35mm screws each side of the lintel insert.
56
56
58
58
13
