OFMT
[<
type
>
=
<
value
>] [<
type
>
=
<
value
>]
where
Type Value
v
– to set the output standard format.
0 = NTSC
1 = PAL
c
– to set the component analog video.
0 = RGB
1 = YUV
b
– to set the video blanking standard.
0 = Analog
1 = SDI(D1)
Sharpness
This adjustment sets the analog output encoder sharpness setting. Off disables the adjustment. 1 is the softest
setting; 12 is the sharpest setting. This adjustment does not affect the digital (SDI/D1) output (if installed). Use this
setting with the flicker filter settings to achieve the best output.
OSHARP [
n
]
where
[n]
0
– disable sharpness filter
1 – 12 enables sharpness setting; 12 is sharpest
Sync on Green
This, in actuality, allows for the setup of the RGB outputs with sync information encoded on all RGB outputs, not just
the green. The following command gets/sets the output sync-on-green state. If [n] is specified, SOG will be set
accordingly.
OSOG [
n
]
where
[n]
1
– enable SOG
0
– disable SOG
Test Patterns
This command is used to get or set the output test pattern. If [n] is specified, the output test pattern will be set the
selected pattern.
OTPAT [
n
]
where
[n]
0
– turn off test pattern
1
– SMPTE (75% color bars)
Pan: Horizontal and Vertical
This command is used to get/set the current pan adjustments. To pan, <
type
>
=
<
value
> must be specified. <
type
>
can be any of the following characters and value must be within the current range. Note that a negative (-) value
means panning left/up (for horizontal/vertical) and a positive (+) value means panning right/down (for
horizontal/vertical).
PAN
[<
type
>
=
<
value
>] [<
type
>
=
<
value
>]
where
Type Value
H
– Horizontal pan
-100.0 to 100.0%, increment of .1%
30 Smart
VIEW – Computer – to – Video Down Converter
Manual # 26-0109901-00 / Revision C
