Serial Commands
The following serial commands are grouped according to the equivalent front panel controls. Refer to the Menu
Operation section for a detailed description of the front panel controls. Please refer to Chapter 4 for the RS-232
command line string format requirements.
Command Format
Each serial command contains at most 2 components: the mnemonic and the parameters list. The mnemonic
consists of at most nine alphanumeric ASCII characters. The parameters list is command-specific. Each command
field is separated by a space (blank character). Command line parameters listed in square brackets ([ ]) indicate that
it’s an optional input.
Invalid Command Handling
If a command is not recognized or contains incorrect parameters, the following will be returned:
Error: Invalid Command
For help, type '?' or ‘help’ at the prompt.
If a command is valid but can only be processed successfully under certain conditions, an error message indicative of
the specific problem will be returned.
Command Listing
The following commands are used to display a list of valid commands and its brief descriptions:
?
HELP
Command-Specific Information
For a detailed explanation of a particular command, type a ‘?’ as the first parameter after the command mnemonic.
For example, to get detailed help on the input source selection command, use ‘ISRC ?’
Commands Summary
The following are the available commands listed in alphabetical order:
Command Description
------------------
----------------------------------------
CURSORLOC Get/Set the cursor location
FILTER
Get/Set current flicker filter
FREEZE
Get/Set freeze control
FULLSCRN
Set image to full screen
GLCK
Get/Set Genlock
GLPHASE
Get/Set genlock H & SC phase
IEDGE
Get/Set input edge adjustments
IPADJ
Get/Set input picture adjustments
OASPR
Get/Set output aspect ratio
OFMT
Get/Set output video & color space format
OSHARP
Get/Set output encoder sharpness setting
OSOG
Get/Set output Sync-On-Green
OTPAT
Get/Set output test pattern
PAN
Get/Set horiz. & vertical pan
RESET
Performs a system factory reset
RS232CFG
Get/Set the serial I/O configuration
USCAN
Get/Set underscan
ZOOM
Get/Set zoom factor
Flicker Filter Settings
This command is used to get or set the flicker filter and adaptive filter being used. If [n] is specified, the selected
flicker/adaptive filter combination will be deployed.
Manual # 26-0109901-00 / Revision C
SmartVIEW – Computer – to – Video Down Converter 27
