Push Button
Action
SEL
Used to accept, choose, or select a menu option, control setting, or configuration
change.
ESC
Current operation in progress is cancelled. If in a control, control function terminates.
Control returns to the previous menu or the system status display. Any changes
made within a control function are undone.
MENU
The front panel display changes to the Main Menu. This gives the user quick access
to the picture adjustment and other system controls. Pressing this button again will
return the display to the system status screen.
TEST PAT
If test patterns are OFF, pressing this button causes the test pattern to be output on
all video outputs. If the test pattern is on, pressing this key turns off the test pattern.
+
This key is used to navigate through a menu or to increment a system parameter. If
a menu selection is displayed, this button is used to highlight the next menu
selection item to the right of the currently selected menu item. When the desired
menu selection is highlighted or the desired control setting is attained, press the SEL
button to save the changes and exit the current menu or press the ESC button to
cancel any changes and return to the previous menu.
-
This key is used to navigate through a menu or to decrement a system parameter. If
a menu selection is displayed, this button is used to highlight the next menu
selection item to the left of the currently selected menu item. When the desired
menu selection is highlighted or the desired control setting is attained, press the SEL
button to save the changes and exit the current menu or press the ESC button to
cancel any changes and return to the previous menu.
Main Menu
Main Menu
Freeze OutFmt Genlck
FlkFlt UndScn GlckAdj
PictAdj Sharp System
Use the + and – buttons to highlight the desired function and press SEL to activate the control function. Press ESC or
press the MENU key again to exit the main menu and return to the system status display. Pressing the TEST PAT
key will also exit the Main Menu. The following functions are available:
Freeze Control (On/Off)
Output Format Settings
NTSC/PAL
RGB/YUV
Sync on Green (SOG) ON/OFF
Blanking Standard (Analog or D1)
Genlock (On/Off)
Flicker Filter Control Settings
Off
1 .. 6 to set desired amount of filtering to achieve the best output. Optimum settings vary with input. Use the
sharpness setting with this adjustment to achieve the best output.
UnderScan (On/Off)
Manual # 26-0109901-00 / Revision C
SmartVIEW – Computer – to – Video Down Converter 11
