Fluke CableAnalyzer DSP-4000 Series, User Manual

Page: 52 / 228

DSP-4000 Series
Users Manual
2-34
Automatically Incrementing the Cable Identification
The cable identification (cable ID) is the name you assign to the Autotest results
saved for a cable. The test tool’s auto increment and auto sequence functions
increment alphanumeric characters (letters or numbers) in the cable ID each time
you save Autotest results, as follows:
•
The auto increment function increments only the last alphanumeric character
in the cable ID.
•
The auto sequence function can increment multiple characters. You specify
which characters are incremented by entering a range of cable IDs in SETUP.
Enabling the Auto Increment Function
The test tool’s auto increment function increments only the last alphanumeric
(letter or number) character of the cable identification name each time you save
Autotest results.
To enable or disable the auto increment function, proceed as follows:
1. Turn the rotary switch to SETUP.
2. Use
$ Page Down
and
D U
(if necessary) to highlight the auto
increment setting; then press
! Choice
.
3. Use
D U
to highlight the setting you want.
4. Press
E
to select the highlighted setting.
The last character of the cable ID you enter when you save the next Autotest will
be incremented when you save subsequent Autotests.