manualshive.com logo in svg

Fluke CableAnalyzer DSP-4000 Series, User Manual

Share
Download
Fluke CableAnalyzer DSP-4000 Series User Manual Download Page 191

B-1

Appendix B

Getting Started with CableManager

Software

Introduction

CableManager software is a Windows

 program that lets you do the following:

•

 

Transfer saved Autotest reports and report summaries from the test tool or the
memory card reader to a PC.

•

 

Sort and edit Autotest reports.

•

 

Customize the appearance of printed reports and summaries.

•

 

Add plots to printed test reports (DSP-4100)

•

 

Transfer SETUP settings to and from the test tool.

•

 

Update the software in the test tool and remote.

The minimum requirements are a 200 MHz Pentium

 microprocessor system with

64 MB of RAM, Windows 95, 98, or NT/2000 software, and a monitor with 800 x
600 resolution.

Notes

The CableManager features described in this manual may vary,
depending on the version of CableManager you received.

CableManager upgrades and documentation on new features are
available on the Fluke Networks website at
www.flukenetworks.com.

The instructions in this manual assume that you have already
installed and know how to use Microsoft Windows

 95, 98, or

NT/2000.

Summary of Contents for CableAnalyzer DSP-4000 Series





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands