manualshive.com logo in svg

Fluke CableAnalyzer DSP-4000 Series, User Manual

Share
Download
Fluke CableAnalyzer DSP-4000 Series User Manual Download Page 185

Maintenance and Specifications

Specifications

8

8-25

Test Results Memory for the DSP-4000

512 KB nonvolatile RAM stores results from at least 500 Autotests. More storage
may be available depending on the number of tests run by the selected test
standard.

CableManager software lets you upload Autotest results to a PC.

1 MB Flash EPROM allows firmware and test standard updates.

Dimensions

Main unit and remote (without LIA):  9.25” x 5” x 3”
(23.5 cm x 12.7 cm x 7.6 cm)

Weight

Main unit (without LIA):  3 lb., 4 oz (1.5 kg)

Remote (without LIA):  3 lb., 1 oz (1.4 kg)

Display

Type:  Graphic bit-mapped LCD with backlight and adjustable contrast.

Size and resolution:  2.8” x 2.4” (7.1 cm x 6.1 cm), 15 lines, 30 characters per line,
240 x 200 bits.

Warranty

One year from date of purchase. LIAs are warranted for 90 days.

Summary of Contents for CableAnalyzer DSP-4000 Series





































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands