![background image](http://html1.mh-extra.com/html/flow/94k-hyperpressure/94k-hyperpressure_manual_2307763048.webp)
014623-1 or -3 Long-block intensifier
(StoneCrafter)
020070-1 Short-block intensifier
(HyperPressure)
6. At one end of the intensifier, remove the end cap from
the tie rods. The check valve assembly will remain in
the end cap due to the compression of the o-ring on
the check valve body.
Note:
Unless check valve maintenance is necessary
(Maintenance Procedure D) it is not necessary to re-
move the check valve assembly from the end cap.
7. Remove the high-pressure cylinder and filler tube from
the intensifier end bell. Rocking the cylinder gently
while pulling outward is helpful in separating the cylin-
der from the end bell. When the cylinder is clear of
the end bell pull it straight out to avoid the ceramic
plunger.
48 | M-376
© Flow International Corporation
94K HYPERPRESSURE INTENSIFIER
Summary of Contents for 94K HYPERPRESSURE
