FLIR M3200 Series Instruction Manual Download Page 83

Page: 83 / 190

Using the Main Menu

To reset the system to factory default settings:

1. From the Main Menu, click

and then click

Setting>Default

2. Check the menus you would like to reset to default settings or check

Factory Default

to reset the entire system to default settings.

3. Click

17.3.26

Upgrading Firmware from USB

Firmware upgrades provide enhanced functionality. The system will automatically check
for firmware upgrades if it is connected to the Internet. The system also supports firmware
upgrades from a USB thumb drive (not included).

To upgrade firmware from a USB drive:

1. Download the firmware upgrade from

www.flirsecurity.com/pro

2. Extract the firmware file and copy the firmware to a blank USB thumb drive.

NOTE

Do not have any folders on the USB thumb drive—just the firmware file.

3. Insert the USB thumb drive to a USB port on the system.

4. Right-click and then click

Main Menu

. Click

>Setting>Upgrade

5. Click

Start

#LX400051; r. 1.0/23100/23101; en-US

Summary of Contents for M3200 Series































































































































































































Search results

Summary of Contents for M3200 Series

Reviews:

Related manuals for M3200 Series

Brands by name

Popular brands

FLIR M3200 Series, Instruction Manual

Search results

Summary of Contents for M3200 Series

Reviews:

Related manuals for M3200 Series

Brands by name

Popular brands