FLIR M3200 Series Instruction Manual Download Page 23

Page: 23 / 190

Basic Setup (M3200 / M4200 SERIES)

7.4

Step 4: Connect the Monitor

• Connect the included HDMI cable from the

HDMI

port to the TV or monitor

(recommended).

• Connect a VGA cable (not included) from the

VGA

port to the monitor.

1. VGA port.
2. HDMI port.

7.5

Step 5: Connect the Power Adapter and Power on the DVR

1. Connect the included power adapter to the

DC 12V

port. Connect the end of the power

adapter to a wall socket or a surge protector.

2. Turn the power switch to

to turn on the DVR.

At startup, the system performs a basic system check and runs an initial loading sequence.
After a few moments, the system loads a live display view.

7.6

Step 6: Upgrade Firmware to Latest Version (if Available)

If a firmware upgrade is available, you will be asked to install it once the system starts up.
It is required to upgrade your system firmware and client software or mobile apps to the lat-
est version to enable remote connection to the system.

If a firmware upgrade is available:

1. After startup, a notification will appear asking you to upgrade the firmware. Click

upgrade.

#LX400051; r. 1.0/23100/23101; en-US

Summary of Contents for M3200 Series































































































































































































Search results

Summary of Contents for M3200 Series

Reviews:

Related manuals for M3200 Series

Brands by name

Popular brands

FLIR M3200 Series, Instruction Manual

Search results

Summary of Contents for M3200 Series

Reviews:

Related manuals for M3200 Series

Brands by name

Popular brands