FLIR M3200 Series, Instruction Manual

Page: 172 / 190

Connecting a PTZ Camera (M3200 / M4200 SERIES) 23
5. Autopan : Click to start autopan. During autopan, the camera will continuously pan
360°.
6. Tour : Click to run the selected tour.
7. Flip : Click to flip the camera 180°.
8. Pattern : Click to run the selected pattern.
9. Reset : Click to move the camera to the home position.
10. Auto scan : Click to run the selected autoscan.
11. Aux : Click to open the aux menu, where you can set up Presets, Tours, Patterns, and
Auto Scans.
23.2.1 Presets
Presets will save a camera position for quick retrieval.
To add presets:
1. Click to open the aux menu.
2. Click the Preset tab.
3. Enter the number of the preset you want to create under Preset .
4. Move the camera to the desired position and click Set .
To go to a preset:
• Under No. , select the number of the preset you would like to go to and click .
23.2.2 Tours
Tours will cycle through a set of presets.
To create a tour:
1. Click to open the aux menu.
2. Click the Tour tab.
3. Under Patrol No. , select the tour you would like to configure.
4. Under Preset , select a preset you would like to add to the tour.
#LX400051; r. 1.0/23100/23101; en-US
162