FLIR M3200 Series, Instruction Manual, Page: 29 / 190

Remote Control 10
10.1 Setting the Remote Control Address
If you have more than one system, you can set up your remote control to pair with a specif-
ic system.
To set the remote control address:
1. Right-click and click Main Menu. Enter the system user name (default: admin ) and
password (default: 000000 ).
2. Click >General>General .
3. Under Device No. , enter the address number you would like to assign to the remote
control.
4. Click OK .
5. Using the remote control, press Add . Then enter the address number and press Enter .
#LX400051; r. 1.0/23100/23101; en-US
19