9 Measurement
FLUXUS F808
9.1 Parameter input
85
UMFLUXUS_F808V2-2EN, 2020-06-25
9.1
Parameter input
The pipe and fluid parameters are entered for the selected
measuring point. The parameter ranges are limited by the
technical characteristics of the transducers and the trans
-
mitter.
• Select the program branch
Parameter
.
• Press ENTER.
Warning!
Touching live parts
Electric shock or arc faults can led to severe injuries. The measuring instrument can be damaged.
→ Prior to any work on the transmitter (e.g., installation, dismounting, connection, start-up), the transmitter
has to be disconnected from the power supply.
Caution!
Safety and accident prevention regulations for electrical systems and equipment
Failure to observe these regulations may lead to severe injury or death.
→ Observe the safety and accident prevention regulations for electrical systems and equipment.
Notice!
The parameters will only be stored when the program branch
Parameter
has been edited in its entirety.
Parameter
Outer Diameter
Wall Thickness
Pipe Material
Lining
Roughness
Medium
Medium Temperat.
Transducer Type
Additional cable