7 Connection
FLUXUS F808
2020-06-25, UMFLUXUS_F808V2-2EN
54
The transmitter consists of 1 housings. The terminals for the connection of transducers, outputs and power supply are on
the rear side of the housing, see Fig. 7.1.
Warning!
Touching live parts
Electric shock or arc faults can led to severe injuries. The measuring instrument can be damaged.
→ Prior to any work on the transmitter (e.g., installation, dismounting, connection, start-up), the transmit
-
ter has to be disconnected from the power supply.
Caution!
Safety and accident prevention regulations for electrical systems and equipment
Failure to observe these regulations may lead to severe injury or death.
→ Observe the safety and accident prevention regulations for electrical systems and equipment.
Important!
Do not use objects to open the housing which may damage the thread or housing gasket.
Fig. 7.1:
Connections of the transmitter
1 – transducers
2 – power supply
3 – outputs
4 – equipotential bonding terminal
3
2
1
4