18 Settings
18.5 Program code
FLUXUS F808
2020-06-25, UMFLUXUS_F808V2-2EN
156
18.5.2
Intervention in the measurement
If a program code is activated, the message
PROGRAM CODE ACTIVE
will be displayed for a few seconds when a key is
pressed.
The input of a program code is interrupted by pressing key CLR.
If key BRK is pressed:
In order to stop a running measurement, the complete program code has to be entered (= Break Code).
• Enter the program code with the keys
and
.
• Press ENTER.
If the entered program code is invalid, an error message will be displayed for a few seconds.
If the entered program code is valid, the measurement will be stopped.
If a command is selected:
In order to execute a command, it is sufficient to enter the first 3 digits of the program code (= Access Code).
• Enter the first 3 digits of the program code with the keys
and
.
• Press ENTER.
At first,
000000
is displayed. If the program code starts with
000
, ENTER can be pressed immediately.
18.5.3
Deactivation of the program code
• Select
Special Funct.\Program code
.
• Press ENTER.
• Enter "
------
" to delete the program code.
• Press ENTER.
If the character "
-
" is entered less than 6 times, this character sequence will be used as the new program code.
Special Funct.\Program code
INPUT BREAK_CODE
CODE:
000000
INPUT BREAK_CODE
INVALID CODE !
INP. ACCESS CODE
CODE:
000000