18 Settings
18.1 Dialogs and menus
FLUXUS F808
2020-06-25, UMFLUXUS_F808V2-2EN
150
18.1.6
Alarm state indication
• Select
on
to display the alarm state during the measurement.
• Press ENTER.
18.1.7
Units of measurement
It is possible to set the units of measurement for the length, temperature, pressure, density and kinematic viscosity and
sound speed.
• Select a unit of measurement for all quantities.
• Press ENTER after each selection.
18.1.8
Settings relating the fluid pressure
It is possible to set whether the absolute or the relative pressure is to be used:
• Select
on
or
off
.
• Press ENTER.
If
on
is selected, the absolute pressure p
a
will be displayed/input/transmitted.
If
off
is selected, the relative pressure p
g
will be displayed/input/transmitted.
p
g
= p
a
- 1.01 bar
The pressure and its unit of measurement will, e.g., be displayed in the program branch
Parameter
. It is followed by the
selected pressure, indicated in parentheses:
a – absolute pressure
g – relative pressure
Special Funct.\...\Dialogs/Menus\SHOW RELAIS STAT
Special Funct.\...\Dialogs/Menus\Pressure absolut
Fluid pressure
1.00 bar(a)