16 Advanced functions
FLUXUS F808
16.8 FastFood mode
133
UMFLUXUS_F808V2-2EN, 2020-06-25
16.8.1
Enabling/disabling the FastFood mode
• Enter the HotCode
007022
, see section 8.4.
• Select
yes
to enable the FastFood mode,
no
to disable it.
• Press ENTER.
If the FastFood mode is enabled, a time t has to be entered. When the FastFood mode is started, the signal amplification
settings will always be checked after the expiration of time t.
Enter zero if no check is to be carried out.
16.8.2
Storage rate of the FastFood mode
If the FastFood mode is enabled and when activating the data logger it is necessary to enter a storage rate in ms in the
program branch
Output Options
.
16.8.3
Activation/deactivation of the FastFood mode
If the FastFood mode is enabled and a measurement is started, the normal measuring mode will still be running (i.e. mea
-
surement with permanent adaptation to the measuring conditions). If the data logger is activated, the measured values will
not be stored.
• During the measurement, select the command →
Toggle FastFood
in the upper line to activate/deactivate the
FastFood mode.
• Press ENTER.
The activated measuring mode can be displayed in the upper line.
If the data logger is activated, a new data set will be created and the storing of measured values will be started. If the
FastFood mode is deactivated or the measurement is interrupted, the storing will be stopped.
Enable FastFood
Enable FastFood\FF-check (0=OFF)
Output Options\...\Storing\Storage Rate
Notice!
The values of the current series of measured values will be deleted if the FastFood mode is deactivated and activated
again without interrupting the measurement.
The values of the current series of measured values will be kept if the measurement is interrupted before the
FastFood mode is activated again. A new series of measured values is created when the next measurement is
started.
Mode=FastFood
54.5
m3/h