42
9. Press the flavor line to be flushed and follow
the instructions outlined on the Jumbo
Touch Panel to flush the syrup line until it is
empty.
10. When the line is empty, press CANCEL and
disconnect the Pump Flush Adapter.
Repeat the process for the second line, then
the third, and so on until all the lines have
been cleared of sanitizer solution.
NOTE:
THE FLUSH FUNCTION WILL
CONTINUE FOR 15 MINUTES. YOU MAY
STOP IT AT ANY TIME BY PRESSING
“CANCEL”.
11. When all lines have been emptied, return
the Pump Flush Adapter to the position
under the trays.
12. Ensure the other Flavor Burst parts are
stored in a sanitary place for the off-season.
When opening next season, be sure to
perform the Clean-In-Place procedure again
to sanitize all pumps before recharging the
system with syrups.
13. When opening next season, be sure to
perform the Clean-In-Place procedure again
to sanitize all pumps before recharging the
system with syrups.
26263
Summary of Contents for JBT 80FCB-2B
