30
14. Make sure the syrup bag is settled neatly
into the tray, and then install the loaded tray
into the cabinet.
15. Once the flushing process has completed,
disconnect Pump Flush nozzle from the
Syrup Bag Connector. Return the Pump
Flush Adapter to its place in the cabinet.
16. Clean the exposed surfaces of the Syrup
Bag Connector and bag fitment with
detergent water, single service towel and
brush if necessary. Then rinse and dry the
Connector and fitment using clean water
and single service towels.
17. Using a spray bottle of approved sanitizer
solution, spray the syrup bag fitment and
the Syrup Bag Connector. Allow these
parts to sanitize for at least 1 minute.
18. Connect the Syrup Bag Connector to the
Syrup Bag Adapter.
19. Repeat Steps 3-18 for any additional flavors
that are being changed out.
20. After the line in sanitized, select “Priming
Functions” in the Maintenance Menu.
21. Select the flavor button of the line to be
primed. The button will pulse as syrup is
pumped through the line.
26196
26273
Detergent
CLEAN
Water
RINSE
DRY
26276
26271
26275
Summary of Contents for JBT 80FCB-2B
