Flavor Burst JBT 80FCB-2B, Equipment, Maintenance And Operations Manual

Page: 40 / 64

39
Miscellaneous Cleaning Procedures
The following parts of the Jumbo Touch Panel
system do not require daily cleaning. Inspect
these areas periodically and clean if necessary
according to instructions.
Mix approved detergent with warm water
according to manufacturer’s instructions. Also
prepare approved sanitizer solution according
to manufacturer’s instructions.
NOTE: DO NOT USE AN EXCESSIVE
AMOUNT OF WATER OR DETERGENT IN
CLEANING THE OUTSIDE OR INSIDE OF
THE CABINET.
Area Under the Cabinet
1. Carefully move the cabinet to an area
outside of where it was sitting.
2. Clean the area using a single service towel
moistened with warm detergent water. Use
a brush if necessary.
3. Rinse area with a single service towel and
clean, warm water and then wipe dry with a
dry single service towel.
4. Clean the outside and underside of the
cabinet using detergent, water and single
service towels.
5. Carefully return the cabinet to its original
place.
Inside of the Cabinet
1. If necessary, disconnect the Syrup Bag
Connectors from the bags and remove the
syrup trays for better access.
2. Using warm detergent water and single
service towels, clean any exposed surface
inside the cabinet.
3. Rinse the cleaned surfaces with a single
service towel moistened with clean water.
4. Dry the surfaces with a dry towel.
5. Clean, rinse and dry the trays if necessary
using detergent, water, and single service
towels. Also clean and sanitize the Syrup
Bag Connectors according to instructions in
the Clean-In-Place procedure in the
SCHEDULED MAINTENANCE section.
9-Tube Assembly Casing
1. Remove the metal casing from the freezer.
2. Using warm detergent water and a single
service towel, clean the metal casing.
3. Rinse casings with a towel and clean water.
4. Dry the casing with a single service towel.
5. Reinstall the casing to the freezer.
Detergent
CLEAN
Water
RINSE
DRY
26144
Detergent
CLEAN
Water
RINSE
DRY
26146