Flavor Burst JBT 80FCB-2B, Equipment, Maintenance And Operations Manual

Page: 60 / 64

59
6. AUTO DRAW SYSTEM: The Auto Draw
System has no draw handle on the spout
and a green button is displayed below the
flavor menu. Hold the cup under the spout,
and press and hold the green button on the
screen to dispense.
If you have the timed servings enabled,
draw the serving until the system sounds a
beep and the screen notifies you to stop
drawing product and then return the handle
to the closed position at the end of the
serving. Otherwise, draw the serving till the
cup is nearly full.
NOTE: ALTERNATIVELY, THE RED BUTTON
ON THE DRAW SPOUT COVER CAN BE
PUSHED TO DISPENSE AS WELL. PRESS
AND HOLD BUTTON TILL THE SERVING IS
FINISHED.
NOTE: THE AUTO DRAW SYSTEM IS AN
OPTIONAL UPGRADE AND NOT INCLUDED
WITH THE STANDARD JUMBO TOUCH
PANEL SYSTEM. CONTACT YOUR LOCAL
DISTRIBUTOR FOR MORE INFORMATION
ON THIS UPGRADE.
7. Evaluate your serving for both appearance
and taste. Look and taste the serving to
ensure the syrup level is acceptable. Draw
servings of the other flavors to evaluate
their syrup dispensing levels.
NOTE: ADJUST THE DISPENSE SPEEDS OF
THE FLAVORS IN THE “SETUP TRAYS AND
DISPENSE SPEEDS” SECTION OF THE
MAINTENANCE MENU.
NOTE: YOU CAN ALSO ADJUST THE
FLAVOR STRENGTH IN A SERVING BY
SLOWING OR SPEEDING UP THE
FREEZER’S DRAW RATE.
8. If the timed servings setting is enabled,
draw different serving sizes and compare
them to see if the size of each serving is
what you expected.
NOTE: CHANGE THE SERVING SIZE TIMES
IN THE “ADJUST DISPENSE TIME LIMITS”
SECTION OF THE MAINTENANCE MENU.
26284
NEEDS
LESS
AVERAGE
NEEDS
MORE
26289
SMALL
EXTRA
LARGE
LARGE
MEDIUM