Flavor Burst FB 80M Series, Manual

Page: 46 / 84

44
Cleaning Inside the Cabinet
Detergent
CLEAN
Water
RINSE
DRY
26144
Figure 109
1. Prepare detergent water by mixing McD
ALL PURPOSE SUPER CONCENTRATE
(APSC) (HCS)
with warm water according
to manufacturer’s instructions.
NOTE: DO NOT USE AN EXCESSIVE
AMOUNT OF WATER OR DETERGENT IN
CLEANING THE INSIDE OF THE CABINET.
2. If necessary, disconnect the Syrup Bag
Connectors and remove the syrup trays for
better access.
3. Using warm detergent water, single service
towels, and Large Brush, clean any
exposed surface inside the cabinet.
4. Rinse the cleaned surfaces with a single
service towel moistened with clean water.
5. Dry the surfaces with a dry single service
towel.
6. Clean, rinse and dry the trays if necessary
using detergent, water, and single service
towels. Also clean and sanitize the Syrup
Bag Connectors according to instructions in
the Clean-In-Place procedure in the
SCHEDULED MAINTENANCE section.
Cleaning the Keypad Mounting Bracket
Figure 110
1. Prepare detergent water by mixing McD
ALL PURPOSE SUPER CONCENTRATE
(APSC) (HCS)
with warm water according
to manufacturer’s instructions.
2. Loosen the Mounting Bracket hand screws
and remove the main plate.
3. Clean both the main plate and the plate
attached to the freezer using a single
service towel moistened with warm
detergent water. Use the Large Brush if
necessary. The hand knobs may also be
cleaned separately.
4. Rinse the mounting bracket parts with a
single service towel and clean, warm water
and then wipe dry with a dry single service
towel.
5. Reassemble the Keypad Mounting Bracket
according to instructions.